I've only been running ABC project units for a short time, so don't know if this is a normal process or not?

I have one ABC unit that was sitting at 12.614% and had been running for 60 hours and 180 hours (approximate) time to complete. Other units list 4:51 as the time to complete.

I did a restart on the machine, and it seems to have restarted the unit, since the 60 hours disappeared. But now I notices the same unit seems to have been running for over 12 hours, and shows the 12.614% with no more movement and shows 26 hours to complete?

Is this something normal with some units or out of the ordinary.

System is a Phenom II 955 quad system and other units are running normally at the same time.

This can happen with some units, I am guessing you are talking about this unit: http://abcathome.com/workunit.php?wuid=14115606

You can see that others have also had problems with it, if you choose you can always abort it and someone else will get it. If you choose you can also just keep trying and see if you get lucky and finish it.

The unit is now at running for 23 hours and still 12.614% and now reports 43 more hours to complete. So there has been no change in the percentage, so it appears that the unit would never end. The other ABC units I have running on the machine that listed 4:51 minutes to complete, but actually completed in about 1:30 minutes on the machine.

The unit is abc_sieve_wu_00567413_2

So not sure what is the best to do? Just aborting it to have another user get it with the same issue? Seemed to be running normal till it got to the 12.614%.

Just abort it and move on then. Someone else will get it to crunch so all is not lost. Read my reply to Jeff Gu though about aborting too many units.

I've only been running ABC project units for a short time, so don't know if this is a normal process or not?

I have one ABC unit that was sitting at 12.614% and had been running for 60 hours and 180 hours (approximate) time to complete. Other units list 4:51 as the time to complete.

I did a restart on the machine, and it seems to have restarted the unit, since the 60 hours disappeared. But now I notices the same unit seems to have been running for over 12 hours, and shows the 12.614% with no more movement and shows 26 hours to complete?

Is this something normal with some units or out of the ordinary.

System is a Phenom II 955 quad system and other units are running normally at the same time.

This can happen with some units, I am guessing you are talking about this unit: http://abcathome.com/workunit.php?wuid=14115606

You can see that others have also had problems with it, if you choose you can always abort it and someone else will get it. If you choose you can also just keep trying and see if you get lucky and finish it.